Frequently Asked Question
VP Cub Jr, VP Cub, and VP Max Packing Instructions
Last Updated 9 years ago
VP Cub Jr, VP Cub, and VP Max Packing Instructions
Required Materials:
Replacement shipping items are available from ViewPlus- Original shipping box
- Original shipping foam
- Foam head block
- Low adhesion tape (masking tape or painters tape)
- Packing tape
Do not include:
Unless specifically requested, please do not include the following items- Power cord
- USB cord
- Paper knob
- Single sheet feeder
Packing Instructions:
- Remove the sound cover.
- Open the embosser lid and place the foam head block inside restricting the movement of the embossing head.
- Use the low adhesion tape to secure the foam block in place.
- Use low adhesion tape to secure the lid close.
- Use low adhesion tape to secure the tractor feed assembly in place.
- Optional: Place the printer in the shipping bag.
- Place the embosser on it's left side and then secure the right foam shipping cap on to the embosser.
- Place the printer on the right foam shipping cap and insert the sound cover for the embosser.
- Secure the left foam shipping cap on to the embosser and place it on its bottom.
- Place the embosser and foam end caps in to the ViewPlus box.
- Seal the box with packing tape.
- Contact your freight forwarder to arrange shipping.